1. The drip irrigation pipe production line adopts high efficiency extruder, swift net changer and screw plastic blowing head.
2. Specially designed vacuum composite forming die to ensure the accuracy and composite density.
3. Unique measurement device and scale huff to ensure the precise of products.
4. Extruder and haul off adopt AC fre quency conversion technology.
5. Temperature is adjusted by temperature control meter to realize PID control.
6. The production is controlled by PLC and equipped with human-computer interface, all the technical parameters can be set on the touch screen.
| Name | Parameter | |
| General | Efficient | |
| Screw | 55/30 | 65/30 |
| Main motor | 18.5kw | 37kw |
| production speed | 18-30m/min | 20-60m/min |
| Dripper Maximum screening convey speed | 150/min | 200/min |
| Dripper inserting speed | 80 / min | 180/min |
| Dripper spacing | 100mm-1000mm(It can be adjustable) | 100mm-1000mm(It can be adjustable) |
| Tractor speed | 1-30m/min | 1-60m/min |
| Drilling speed | 80/min | 180/min |
| Production line length | 15m | 15m |
| Production line width | 3m | 3m |
| Vacuum pressure | -0.001*-0.002kpa | -0.001*-0.002kpa |
| Air pressure | 0.5-0.75mpa | 0.5-0.75mpa |
| Cooling water pressure | 0.2-0.3mpa | 0.2-0.3mpa |
| Center height | 1m | 1m |
| Rated power | 37kw | 55kw |
| Appearance size | 15000mm×1500mm×2000mm | 19000mm×1500mm×2000mm |
| Weight | 2760kg | 3360kg |
| Production diameter | 6,12,16 | 6,12,16 |
| wall thickness | 0.3-0.7,0.5-0.9,0.5-0.9 |
0.3-0.7,0.5-0.9,0.5- 0.9 |
| Material | LDPE,HDPE | LDPE,HDPE |
The PE drip Irrigation line is used to produce single wing labyrinth water conveying pipe. The irrigation pipe widely in agricultural.
This drip irrigation pipe extrusion line can produce mosaic flat emitter drip irrigation pipe continuously and effectively. The output has the characteristics of even thickness, high efficiency of putting emitter inside pipe and tightness between emitter and pipe.
1. Max speed: 120m/min
2. Center Height: 1000mm
3. Installed power: about 130KW
4. Equipment Length: 40m
Address
Nuozhuang, Sanlihe Office, Jiaozhou City, Qingdao City, Shandong Province, China
Tel
