PVC PC Hot Cut Granulate Production Line

Product Introduction Of The PVC PC Hot Cut Granulate Production Line

The machine has a frequency control pelletizing system , strong winds sent As noted in the output level of the available one and three stainless steel hopper , with extruded high yield , uniform diced, avoid plastic mixing granulation process in the production process degradation characteristics.
PVC granulating machine is composed by a conical twin screw extruder and the correspondingly pelletizing downstream equipment, it is suitable for the pelletizing of PVC raw material or add some additives, such as wooden power.The screw and barrel, made of 38CrMoAlA, and made through smiting, tempering, nitriding treatment. Different from other: screw edge is tempered after rough finish with good harder ability, Meanwhile, through accurate processing, phases of screw edges have small error, the barrel and screw have high universal property, the structure of screw is different based on the material.

Product Parameter(Specification) Of The PVC PC Hot Cut Granulate Production Line

Product Feature And Application Of The PVC PC Hot Cut Granulate Production Line

This PVC PC hot cut granulate production line is applicable to rigid PVC, soft PVC, PVC waste material, PP, PE and WPC granulation processing equipment, i.e. using single screw or twin-screw type screw design. It uses pneumatic conversion and strong wind blowing. At the same time can adjust stainless steel storage container and can run at high speed for along time while extrude stably.

Production Details Of The PVC PC Hot Cut Granulate Production Line

PVC hot cutter granulating production line
1. Cutting of PVC and other plastic materials
2. Hot-cutting